Camion-benne Howo Howo Nx 6x4 375hp Diesel Tipper Truck neuf

Product Description
The Howo Nx 6x4 375hp Diesel Tipper Truck is engineered for heavy-duty hauling in demanding environments. Combining Sinotruk’s proven WD615.96 powerplant with a rugged chassis and FAST transmission options, this tipper truck is designed to move bulk materials—sand, gravel, ore and construction spoil—efficiently and reliably. Built to endure high-mileage cycles in mines, quarries and large construction sites, the model balances performance, durability and operator comfort to maximize uptime and reduce operating cost per ton.
Core Advantages
Engine & Performance
At the heart of this tipper truck is the WD615.69 engine, a 6-cylinder, turbocharged diesel delivering 375horsepower. Its design emphasizes torque delivery across a broad rpm range—crucial for maintaining momentum when hauling heavy loads up grades or negotiating soft ground. The engine meets Euro II/III emission bands in applicable markets and is compatible with heavy-duty cooling and air-intake systems that help sustain performance during continuous operations. For fleet managers, the result is dependable power that supports both high payload and frequent stop-start cycles typical in mining and construction.
Transmission and Driveline
The truck pairs the WD615.96 with FAST transmissions available in 10- or 12-speed manual versions. These gearboxes are selected for durability under heavy loading and to provide a wide spread of ratios for on-road cruising and low-speed tractive effort. Typical configurations use a 6x4 axle layout for good traction and maneuverability while optional 8x4 setups raise allowable payload and improve load distribution for larger-volume work. Heavy-duty axles—commonly rated as 9T front and 16T rear—provide the load-bearing capacity needed for consistent operations.
Cargo Body & Materials Handling
The cargo box is built from high-strength, wear-resistant steel with typical bottom plate thickness of 8mm and side panels at 6mm. For particularly abrasive work—such as hard rock or ore—manganese alloy steel options are commonly used to extend service life. The standard capacity range of 16–20 m³ suits a wide range of bulk materials while remaining compatible with common loading equipment and site geometry. Body geometry and side heights can be optimized to match payload weight limits and local road regulations, giving fleet operators flexibility in balancing volume versus gross vehicle weight.
Hydraulic Tipping System
Equipped with a reliable hydraulic lifting system, the tipper enables quick self-unloading with controlled tilting. The hydraulic components are chosen for durability and serviceability, making maintenance straightforward in remote locations. Controls are ergonomically placed for operator convenience, and safety features—such as locking mechanisms and pressure relief—help prevent accidental lowering. Faster cycle times translate directly into higher material throughput on site.
Cabin, Comfort and Ergonomics
The HOWO NX cabin delivers a modern working environment designed to reduce driver fatigue and support long shifts. Standard features typically include efficient heating and air conditioning, user-friendly instrumentation, and an adjustable seating package. Many configurations offer a sleeper berth option for multi-day operations or long-distance transfers between sites. Visibility, ingress/egress steps and handholds are engineered to meet the needs of busy operations where drivers are frequently entering and exiting the vehicle.
Safety and Driver Assistance
Safety is integral to the design. Heavy-duty braking systems, robust chassis frames and stable load distribution reduce the risk of rollover during tipping. The cab layout supports clear sightlines to the cargo bed and mirrors, and optional equipment packages can include enhanced lighting, backup alarms and cameras for congested sites. Properly configured, the vehicle meets common safety expectations for commercial tipper fleets in mining and construction environments.
Typical Applications and Target Users
This tipper truck suits any operation requiring frequent, high-volume haulage of bulk materials. Typical use cases include:
Maintenance, Serviceability and Parts
Designed with routine serviceability in mind, key service points are accessible to reduce time in the workshop. Common maintenance items—filters, fluids, brake components and hydraulic seals—follow industry-standard intervals and are supported by an established parts ecosystem. Operators should implement scheduled inspection routines to monitor body wear, hydraulic hoses and driveline components. Where manganese or other wear-resistant materials are used in the cargo body, inspection intervals should be adjusted to reflect operating abrasiveness and duty cycle.
Spare Parts and Local Support Considerations
Sourcing genuine parts for the WD615.96 engine and FAST transmission ensures reliability and preserves warranty coverage. For international operations, establishing relationships with local distributors or authorized service centers reduces lead times on critical components, and fleet managers should plan parts inventories based on vehicle count and site remoteness.
Environmental and Efficiency Considerations
While the WD615.96 meets Euro II/III standards in applicable markets, achieving efficient fuel use depends on matching vehicle configuration to duty cycle and ensuring proper maintenance. Correct gearing, tire selection and limiting unnecessary idling are simple measures that deliver tangible fuel savings over a fleet’s lifetime. For operations in regions with stricter emissions requirements, managers should review local regulations and consider appropriate after-treatment or alternative models where required.
Comparisons and Positioning
Compared with lighter commercial tippers, this heavy-duty configuration emphasizes longevity and payload over road-only maneuverability. Against competitors in the same heavy-tip class, the combination of the WD615.96 engine, FAST transmissions and reinforced cargo bodies positions the truck as a value-focused option for site operators who prioritize ruggedness, serviceability and parts availability in demanding work environments.
Common Questions from Operators
Buying Considerations
When evaluating this tipper truck for purchase, assess typical payloads, local road limits and site conditions. Decide between a 6x4 or 8x4 configuration based on payload and maneuverability needs. Contact us. Specify body materials and thicknesses according to abrasive characteristics of the loads you haul—proper upfront choices significantly lower long-term operating expense.
Conclusion and Next Steps
For operations that demand dependable heavy haulage, the Howo Nx 371hp dump truck platform delivers a balanced package of engine performance, durable bodywork and serviceable components. Its configuration flexibility—6x4 or 8x4, a range of body capacities and wear-resistant materials—lets fleet managers optimize for throughput and lifecycle cost. To determine the exact specification that best matches your site, consider a site assessment and workload analysis to align axle ratings, body design and powertrain options with operational goals. Properly specified and maintained, this tipper truck is a workhorse that keeps material moving and projects on schedule.
Howo Nx 6x4 375hp Diesel Tipper Truck
Parameter
Engine: 375hp
Condition: Brand New / Used
Robust Sinotruk Howo NX 6x4/8x4 dump truck powered by the 371-420 HP engine . Built for mining and construction with FAST transmission
heavy-duty axles
high-strength cargo body and hydraulic tipping for efficient bulk material hauling